STORTZ ROOFING SLATE HAMMERS
These are the traditional tools for cutting and installing roofing slate. In conjunction with a slater's stake (see below) or some other stable straight edge, precise chamfered cuts can be made with the hammer alone. The pick end perforates the slate for a snap cut and then the beveled cutting blade on the handle is employed to "chop" a clean edge. Claw, hammer face, pick and cutting edge, all are the product of years of study of the process of cutting and working roofing slate. Slate hammers are mounted with an all leather handle for comfort and control.
|
83-B: Standard Pattern Slate Hammer, Right Handed
$110.00
Our standard pattern slate hammer is forged of high quality tool steel and made to the most exacting standards throughout. Point, claw and hammer face are specially heat treated to withstand tough use. The claw at center is made for pulling nails without damaging installed slate. The beveled edge at top of midsection is used for trimming slate. An all leather handle is featured.
- Head Face 3/4" X 7/8"
- Overall Length 12 1/2"
- Weight 26 oz
Prices discounted "direct from the manufacturer". Distributors please call for dealer pricing.
|
83-B: Right hand slate hammer, standard pattern.
83-B: Standard Pattern Slate Hammer, 1895 Stortz Catalog, see photo for definitive image.
|
|
83-C: Slate Hammer, Left Hand, French Pattern
$110.00
This left handed European style hammer is hand forged, fully polished and fitted with an all leather "bell" style grip. The nail puller is slotted to the side instead of the front. The rectangular hammer face (5/8" x 3/4") offers sharp corners.
Prices discounted "direct from the manufacturer". Distributors please call for dealer pricing.
|
83-C: Left hand French pattern slate hammer.
|
|
82-A: Slate Hammer, Right Hand, French Pattern
$110.00
The right handed version of the French pattern hammer listed above, also hand forged, fully polished and fitted with an all leather "bell" style grip.
Prices discounted "direct from the manufacturer". Distributors please call for dealer pricing.
|
82-A: Slate Hammer, Right Hand, French Pattern
|
|
83-D: Slate Hammer Chain Holder
$16.00
Keep your slate hammer secure and easily accessible:
- 3 chain holder specially designed for use with any belt up to 1 3/4" width.
- Used for securely hanging Slate Hammer from waist.
Prices discounted "direct from the manufacturer". Distributors please call for dealer pricing.
|
83-D: Slate Hammer Chain Holder
|
|
83-H: Roofer's Restoration Hammer
$45.00
This heavy duty specialty hammer is weighted for use with our slate rippers and equipped especially for roof restoration work. Also ideal for pounding heavier nails.
- Magnetic nail holder.
- Polished hammer head offers checkered striking face on one end.
- Pointed end allows for punching nail holes in slate
- 28 oz
Prices discounted "direct from the manufacturer". Distributors please call for dealer pricing.
|
83-H: Heavy 28 oz. Specialty Restoration Hammer.
|
|
85-A: Straight Slaters Stake
$60.00
These portable, lightweight slater's stakes allow precise cutting of slate with a slate hammer at or near the site of installation. Driven into any stable wooden member such as a hip, ridge or scaffold plank, they provide a stable cutting edge for working the slate. Used in conjunction with our fine slate hammers a more prominent bevel can be achieved, more natural looking than slate cutters can produce. Also excellent for cutting curves and round holes in slates to cover vent pipes, etc.
- Stock Size 1 1/4" X 1/4"
- Blade Length 24"
Prices discounted "direct from the manufacturer". Distributors please call for dealer pricing.
|
85-A: Straight slaters stake.
|
|
3300: "SUPER 6" Slaters Roof Bracket
$32.00
The all around, full capacity roofing bracket made specifically for the needs of the roofer working on and over slate:
- Adjusts and locks to six positions to fit 33°, 38°, 43°, 48°, 50°, 55° pitch
- Platform for 2" x 12" planks
- Heaviest duty roof bracket, preferred by professional roofers
- Made of galvanized steel for strength, safety and durability
- Folds compactly for easy storage
- Capacity: one person per 8 feet of staging plus 40 lbs
- Maximum space between brackets is 8 feet
- Planks must overlap the bearing surface not less than 12" and not more than 18"
- Complies with OSHA regulations
- Weight 8 lbs
All prices discounted "direct from the manufacturer". Distributors please call for dealer pricing.
|
3300: "SUPER 6" Slaters Roof Bracket
|
|
