No products in the cart.
Frequently Asked Questions
What types of seams does this work on?
The Falzcutter is specifically designed to cut below a 1″ or a 1.5″ mechanically locked standing seam. It is not designed for trapezoidal (they can stand 1″ on the trapezoid) panel systems or 2″ seams. There is a specific 2″ seam cutting tool that is available as well
What materials is the Falzcutter suited for?
Steel, Stainless Steel, Aluminum, Copper, Zinc and all other common roofing materials
Does the Falzcutter cut through the clips as well?
Yes, the cutter will cut below the folded portion of the seam and cut right through the clips
Buschmann Standing Seam Roof Panel Cutter
$1,429.00
Make Quick Work of Standing Seam Tear-Off
The Buschmann Standing Seam Roof Panel Cutter turns one of the toughest parts of metal roof tear-off into a fast, controlled process. Powered by a conventional cordless drill, the cutter runs below the standing seam and cuts through both the locked seam and the clips, allowing panels to be removed quickly without manually opening the locks.
- Removes both single- and double-lock standing seam panels
- Works with 1″ and 1½” seam heights – will not work on 5/8″+ widths
- Weight – 6lbs; Speed: 90 feet per minute
- Cutting speeds up to 90 ft/min
- Includes heavy-duty carrying case
- Lightweight at only 6 lbs.
- Replacement Parts(opens in new tab)
- NOTE: This tool will not work on 2″ high seams, trapezoidal seams, or commercial panels using metal and clips thicker than 24 gauge.
Max Sheet Metal Thickness
Stainless Steel – 0.5mm, 26 gauge
Aluminum, Copper, Zinc – .032″, 20 oz, 0.8mm
Steel – 24 gauge
Customer Satisfaction
Guarantee
100% secure
safe checkout
Same Day Shipping
Order by 1pm est
easy returns
no hassle
Frequently Asked Questions
What types of seams does this work on?
The Falzcutter is specifically designed to cut below a 1″ or a 1.5″ mechanically locked standing seam. It is not designed for trapezoidal (they can stand 1″ on the trapezoid) panel systems or 2″ seams. There is a specific 2″ seam cutting tool that is available as well
What materials is the Falzcutter suited for?
Steel, Stainless Steel, Aluminum, Copper, Zinc and all other common roofing materials
Does the Falzcutter cut through the clips as well?
Yes, the cutter will cut below the folded portion of the seam and cut right through the clips
Issac Beaudoin (verified owner) –
works great, worth the money.
Fintan Cournane –
This tool is amazing,
There is no better way to remove a standing seam!
I’ve only ever ripped seam off three times in my career, a fire,bad paint from metal manufacture,and a subpar install from previous installer:(!!!
It will go as fast as you can run up or down the hook ladder with it!
They say you cannot run it through all five rolls at the top of hem but it will do it without slowing down.
It Wears the cutting dies down but they are replaceable .
Speed is everything and this tool delivers that exactly!
I highly recommend this tool if you need to remove a large standing seam roof it will pay for itself immediately!!!
It is also much safer for my help to remove the seam in this manner as opposed to the traditional manner!