TRUMPF N160 – Profile Nibbler
$1,399.00
- Highly maneuverable to allow cutting of corrugated, trapezoidal, and even flat sheets/panels.
- Handles radii and angled cuts with ease.
- Lightweight: 3.1lbs
- Equipped with 2 x 10.8 V battery gives above average run time
- Distortion-free cutting edges without corrosion and minimal vibrations
- Optimal contouring and profiling – Ideal for hard to reach places. Change the cutting direction at any time
- Punch and tool carrier can be changed without tools
- Punches can be replaced simply for the low cost of $25.00
- Capacity: 18ga steel
- Radius minimum: 1″ (5/8″ starting hole)
- PN 130 – Spec Sheet – note: 5 year warranty offered with purchased product
TruTool PN 130 Li-ion battery 10.8V (1)
MAXIMUM SHEET THICKNESSES
MAXIMUM SHEET THICKNESS, STEEL UP TO 400 N/MM² 1.3 mm
MAXIMUM SHEET THICKNESS, STEEL UP TO 600 N/MM² 0.8 mm
MAXIMUM SHEET THICKNESS, ALUMINUM UP TO 250 N/MM² 2 mm
RADII
SMALLEST RADIUS 25 mm
GENERAL
WORKING SPEED 2.5 m/min
IDLE RUN STROKE RATE 2600 RPM
STARTING HOLE DIAMETER 15 mm
VOLTAGE 10.8 V
Reviews
There are no reviews yet.