• For bending sheet metal legs from 90° down to 180° (hem) up to 1 1/2″
• Useful for creating hems on rake or eaves edge that extend past the size of a brake
• No adjustments – metal will slide between spacing up to 1 1/2″ and turn a hem with downward pressure
• Won’t scratch painted or coated materials
• Unlimited panel length capability
• Excellent for standing seam roofing, drip edges, rake edges, and flashings
• Pair with the Wuko 7200 metal bender and save

Specifications

• Maximum Bending Height: 1.57″ (40 mm)*
• Minimum Bending Height: 0.31″ (8 mm)*
• Maximum Material Capacity: 24 ga. steel, 20 oz. copper, .032″ aluminum, and 0.8 mm zinc
• Weight: 5.51 lbs (2.5 kg)

*Maximum and minimum bending heights may vary depending on the material type and thickness.